Water Heaters

After heating and cooling, water heating is typically the largest energy user in the home because it is necessary for so many domestic activities. The capacity of a water heater is an important consideration. The water heater should provide enough hot water at the busiest time of the day. We offer a wide variety of electric, gas and tankless water heaters.

Features

Energy Saver Direct Vent Energy Saver High Efficiency Electric Everhot Tankless
Type Gas Gas Electric Gas
Energy Efficiency High efficiency Standard Efficiency High Efficiency Ultra High Efficiency
Tank Capacity 40-50 gal. 30-100 gal. 40-80- gal. 2.5 gal. per minute
Vent - Type Direct Vent Standard Vent None Direct Vent
Factory Warranty
Tank
6 or 10 years 6 or 10 years 6 or 10 years 10 year on heat exchanger
Factory Warranty
Parts
6 years 6 years 6 years 5 years

Rheem Gas Water Heaters Product Offering

PROG**-**P RH67 PDV

Professional Classic Series: Power Direct Vent

View Brochure
Model Family: PROG**-**P RH67 PDV
Capacity: 40 to 50 gallons
UEF (Efficiency): .63 to .69
Energy Star Rated: ENERGY STAR® certified models available
Self-Cleaning: yes
Venting: power direct vent
Warranty: 6 Years Parts and Tank Warranty
Manufacturer's Stated Benefits:
  • FHR: Up to 82 gallons for natural and LP gas
  • Recovery: 38.4 to 40.4 at a 90 degree rise, based on model
  • Electronic gas control for improved monitoring and service
  • Eco-friendly burner, low NOx design
  • Two pipe system: one pipe pulls in outside air for combustion and the other exhausts combustion gases
  • 120 VAC powered blower
  • New whisper quiet blower
  • Protective control system that disables the heater in the presence of flammable vapor accumulation
  • Enhanced-flow brass drain valve
  • Temperature and pressure relief valve included
  • Low lead compliant
  • Durable silicon nitride igniter (HSI)
  • EverKleen™ patented system fights sediment build-up
  • Standard replacement parts
PRO+G

Professional Classic Plus Series: Ultra Low NOx

View Brochure
Model Family: PRO+G
Capacity: 29 to 50 Gallons
UEF (Efficiency): .58 to .64
Energy Star Rated: No
Self-Cleaning: yes
Venting: Atmospheric
Warranty: 8 Year Warranty
Manufacturer's Stated Benefits:
  • More hot water at a low operating cost
  • FHR: 73 - 104 gallons for natural gas
  • Recovery: Up to 45.5 GPH at a 90? F rise, depending on model
  • Exclusive air/fuel shut-off device for double protection
  • Maintenance free - no filter to clean
  • Protective control system that disables the heater in the presence of flammable vapor accumulation
  • Ultra Low NOx radiant burner design
  • Stainless steel construction
  • SCAQMD Rule 1121 compliant
  • Meets 10 ng/J NOx requirements
  • EverKleen™ patented system fights sediment build-up
  • Premium grade anode rod provides long-lasting tank protection
  • Easy to light - no matches required
  • Enhanced-flow brass drain valve
  • Temperature and pressure relief valve included
  • Exclusive Rheemglas® lining

Ruud Gas, Tankless Water Heaters

RUTG-95DVLN

Tankless 95 Direct Vent Indoor Water Heater

View Brochure
Model Family: RUTG-95DVLN
Application Type: Whole House
Flow Rate: 0.5 to 11 GPM
UEF (Efficiency): .94
Energy Star Rated: No
Heating Technology: Condensing
Location: Indoor
Warranty: 5 Year Parts Warranty
Manufacturer's Stated Benefits:
  • .82 EF with all-copper heat exchanger
  • Intelligent electronic controls designed to increase energy efficiency and safety
  • Exclusive! Water savings setting
  • Low flow fixture compatible
  • Recirculation Pump kit to provide instantaneous hot water at the tap
  • EZ-Link™ cable available for higher demand applications to connect two tankless units to operate as one
  • Digital remote control and 10 ft. of thermostat wire included
  • EZ- Spec™ Sizing Software
  • 1 Year Labor Warranty
  • 12 Year Heat Exchanger Warranty
RUTGH-X

Ultra™ High Efficiency Condensing Tankless Water Heater

View Brochure
Model Family: RUTGH-X
Application Type: Whole House
Flow Rate: 0.40 to 9.5 GPM
UEF (Efficiency): .93
Energy Star Rated: ENERGY STAR® rated
Heating Technology: Condensing
Location: Outdoor
Warranty: 5 Year Parts Warranty
Manufacturer's Stated Benefits:
  • stainless steel condensing heat exchanger
  • Built-in Condensate Neutralizer - reduces installation cost and time
  • Industry-Best Low Activation Flow Rates - provides more fixture options, especially low-flow faucets and shower heads
  • Recirculation Pump kit to provide instantaneous hot water at the tap
  • Built-in condensate neutralizer
  • Intelligent electronic controls designed to increase energy efficiency and safety
  • 1 Year Labor Warranty
  • 12 Year Heat Exchanger Warranty
RUTGH-90

Ultra™ High Efficiency Condensing Tankless Water Heater

View Brochure
Model Family: RUTGH-90
Application Type: Whole House
Flow Rate: 0.4 to 9.0 GPM
UEF (Efficiency): .93
Energy Star Rated: ENERGY STAR® rated
Heating Technology: Condensing
Location: Indoor
Warranty: 5 Year Parts Warranty
Manufacturer's Stated Benefits:
  • Up to .94 EF with stainless steel condensing heat exchanger
  • Built-in Condensate Neutralizer - reduces installation cost and time
  • Intelligent electronic controls designed to increase energy efficiency and safety
  • Exclusive! Water savings setting
  • Recirculation Pump kit to provide instantaneous hot water at the tap
  • Self-diagnostic system for easy installation and service
  • Digital remote control and 10 ft.of thermostat wire included
  • EZ-Spec™ Sizing Software
  • 1 Year Labor Warranty
  • 12 Year Heat Exchanger Warranty
RUTGH84

Ultra™ High Efficiency Condensing Tankless Water Heater

View Brochure
Model Family: RUTGH84
Application Type: Whole House
Flow Rate: 0.4 to 8.4 GPM
UEF (Efficiency): .93
Energy Star Rated: ENERGY STAR® rated
Heating Technology: Condensing
Location: Indoor
Warranty: 5 Year Parts Warranty
Manufacturer's Stated Benefits:
  • Built-in Condensate Neutralizer - reduces installation cost and time
  • Intelligent electronic controls designed to increase energy efficiency and safety
  • Water savings setting
  • Low flow fixture compatible
  • Digital remote control and 10 ft.of thermostat wire included
  • 1 Year Labor Warranty
  • 12 Year Heat Exchanger Warranty

Frequently Asked Questions

What does the Energy Factor (EF) on my water heater mean?

The water heater Energy Factor (EF) is a measure of the overall efficiency of the water heater. This is determined by comparing the energy in the heated water used daily to the total daily energy consumption of the water heater. The EF can be used to compare the energy efficiency of water heaters. Water heaters with higher EFs will have lower annual operating costs than comparable models with lower EFs. A higher EF signifies a more efficient model. Water heaters with high EF ratings may cost more initially, but save energy and money in the long run. Eventually, they will pay for themselves through a lifetime of energy savings.

Where is the

For most water heaters, the anode rod is attached to the hot water outlet of the water heater. If you are facing the front of the water heater (where the labels are), the hot water outlet is on the left hand side. The anode rod is often referred to as a "sacrificial rod".

Most water is rarely "pure". It can contain oxygen, magnesium, fluoride, chlorine and suspended particles. These components, in the concentrations in your water, are usually not bad for you. However, they do contribute to the taste and smell of the water. They also impart a slight conductivity to the water. Through an electrical process called electrolysis, this conductivity will eventually (over a long period of time) cause most metal to rust or corrode. When the water is heated, this electrical process can be accelerated.

Most water heaters are made of a steel tank with a porcelain enamel (glass) lining. However, due to production and assembly methods, it is not always possible to completely cover the inside of the tank. Therefore it is important to provide metal that can be consumed by the electrical process. This is where the sacrificial anode rod comes in. By acting as a lightning rod for the corrosion process, the anode rod draws the harmful electrolytic process away from the water heater tank and focuses the corrosion on the anode rod. Water heaters need this sacrificial anode rod to ensure that the electrolysis does not affect the tanks.

Why doesn't my old water heater make as much hot water as it used to?

The answer may be that you have sediment buildup in your tank. As water heaters age, they tend to accumulate sediment and lime deposits. If the heaters are not cleaned periodically, the sediment may rise to a level that will act as a barrier between the burner and the water, making it harder to heat. An article published in a national ASPE plumbing journal states: for every half inch of sediment on the bottom of a gas fired water heater, it requires up to 70% more fuel to heat the water.

If my water heater was in a flood, do I need to replace it?

Yes. The Air-Conditioning, Heating and Refrigeration Institute (AHRI) recommends that any flood-damaged heating and cooling equipment be replaced, not repaired. From the AHRI website, as it pertains to water heaters:

"Whether your water heater is gas-fired, oil-fired or electric, if it was exposed to flood water, the unit should be replaced. In a gas unit, valves and controls will likely corrode. In an electric unit, the thermostat and controls will likely corrode. In both types, the insulation surrounding the unit will be contaminated and will be nearly impossible to disinfect. Additionally, the insulation would take a long time to dry, leading to corrosion of the tank from the outside.

Even if water heater components have been cleaned and the unit seems to operate properly, parts may corrode in the future. Both gas and electric water heaters have a pressure relief valve that can corrode and stick after being exposed to flood water. Therefore, be sure to replace this valve as well."

(Taken from www.ahrinet.org)

At the suggestion of AHRI, be sure to have your inspection and replacement work performed by a qualified professional.

Can I use my water heater with a solar heating system?

With the increasing costs of energy and a desire for environmental friendliness, some customers are turning to the sun as a way to heat their domestic water. Bradford White manufactures a solar water heating storage tank for use with solar systems. This tank takes the heated water from the solar panels and uses it as a heat source instead of conventional gas, oil or electric heat sources unlike other tanks, this water heater has an electric heating element for back up on cloudy days, and when the solar system is not providing enough heat. However, it is important that you use only POTABLE (or domestic use) water in this tank.

Is a drain pan necessary?

A water heater should be placed in an area that will prevent damage to floors, ceilings, and furniture if the heater leaks. When this is not possible, a drain pan must be installed under the water heater. Since a typical drain pan doesn't hold that much water, it must have a pipe to a drain or other outlet for the water. When installed properly, a drain pan and pipe will keep any leakage under control and protect your belongings from water damage.

What type of maintenance should I do on my water heater?

We recommend that you contact a plumbing professional to perform any maintenance or repairs to your water heater - from periodic checks on the anode rod to ensuring that all connections are secure. Recommendations for maintenance are in your water heater's owner manual. However, there are a few things that you can do:

  • Ensure that there are no sources of flammable vapors in the same area as your water heater (this includes gasoline, heating oils, lighter fluid, propane, etc.).
  • Keep the top of the water heater clean. If you notice water dripping on the water heater from any piping, contact a plumbing professional to have the leak repaired.
  • Keep the space around your water heater clean and free of dirt, boxes, paint cans, aerosol cans, household cleaners and trash. It is important to keep the heater accessible for proper operation and easy maintenance.